Product Highlights
*Flexible
*Upgraded slim S-shaped cross section.​
*Special heat-treated Tech and surface treatment to reduce cracks and improve resistance to cyclic fatigue.
*Greater torsional resistance and flexural strength.
*Improved cutting efficiency by more than 150%.
*“The color variations result from a Diamond-Like Carbon (DLC) treatment” and that DLC coating improve surface finish and also enhance hardness and chemical resistance, thereby improving the fracture resistance of the NiTi instrument.
Introduction
Color
ISO Standard tip size and color, making it easy to distinguish for dentists.
Stopper
ISO standard stopper, used to measure the working length, The blackine on the stoper can indicate the working direction of the files.
Non-cutting tip
Handle
Handle size is 11mm marking it easier to enter into the molar teeth in comparison to the 13mm handle.
Laser mark
18mm, 19mm, 20mm, 22mm
Working length
21mm, 25mm, 31mm
Product Details
Microgram
Element: Tik / Nik / Matrix
Wt%: 43.46 / 46.54 / Correction
At%: 48.51 / 51.49 / ZAF
Element: Tik / Nik / Matrix
Wt%: 43.46 / 43.17 / Correction
At%: 48.22 / 51.78 / ZAF
Usage Protocol
Instruction Manual
1. Create a straight-line access to canal orifice.
2. Gently explore the canal by using #10 stainless steel hand files passively scouting, initial detection the working length and record it.
3. Design an access to the root canal openings with respect to the anatomy of the tooth, giving particular care to smoothing the internal axial walls and to enlarge the root canal coronal 1/3 with the open file (350RPM, 2N·cm) .
4. Use the path file #16/02 with 350RPM,1.5N·cm to scout the coronal 2/3 and make sure the smooth and reproducible glide path is confirmed.
*Tip: Irrigation needs to be used before every steep.
Small canal:
5. Use RCS Rainbow One File #25/.04(400 RPM, 2.0N.cm)with brushing or picking motion to reach the working length
Medium canal:
6. Use the path file #15.5/.03 with 350RPM,1.5N·cm to establish a smooth path, then use RCS Rainbow One File #25/.06(400 RPM, 2.0N.cm)with brushing or picking motion to reach the working length
Large canal:
7. Use the path file #19/.02 with 350RPM,1.5N·cm to establish a smooth path, then use RCS Rainbow One File #35/.04(400 RPM, 2.0N.cm)with brushing or picking motion to reach the working length

8. Use the path file #19/02 and #19/03 with 350RPM,1.5N·cm to establish a smooth path, then use RCS Rainbow One File #35/.06(400 RPM,2.0N.cm)with brushing or picking motion to reach the working length