Product Highlights
1) Unique design.
2) Respect the original anatomy of the tooth.
3) Increases patient safety with enhanced flexibility and resistance to cyclic fatigue.
4) Upgraded slim S-shaped cross section with two safe sides to release more space for debris with higher efficiency.
5) Two safe sides, multi cross section symmetrical design to make whole file dint even, making the cutting more stable and efficient.
Color
ISO Standard tip size and color, making it easy to distinguish for dentists.
Stopper
ISO standard stopper, used to measure the working length, The blackine on the stoper can indicate the working direction of the files.
Non-cutting tip
Handle
Handle size is 11mm marking it easier to enter into the molar teeth in comparison to the 13mm handle.
Laser mark
18mm, 19mm, 20mm, 22mm
Working length
21mm, 25mm, 31mm
Product Details
Suggestion Size
Small: 25/04 Medium: 25/06 Large: 35/04, 35/06
Number Rule
Narrow Canal
2504 prepares the root canal to a diameter of 0.25 mm with a taper of .04 over the first apical millimeters;
Medium canal
2506 prepares the root canal to a diameter of 0.25 mm with a taper of .06 over the first apical millimeters;
Wide canal
3504 / 3506 prepares the root canal to a diameter of 0.35 mm with a taper of .04 /06 over the first apical millimeters;
Usage Protocol
Instruction manual
1. Create a straight-line access to canal orifice.
2. Gently explore the canal by using #10 stainless steel hand files passively scouting, initial detection the working length and record it.
3. Design an access to the root canal openings with respect to the anatomy of the tooth, giving particular care to smoothing the internal axial walls and to enlarge the root canal coronal 1/3 with the open file(350RPM, 2N·cm) .
4. Use the path file #16/.02 (350RPM,1.5N·cm) to scout the coronal 2/3 and make sure the smooth and reproducible glide path is confirmed.

*Tip: Irrigation needs to be used before every step.
Small canal:
5. Use RCS Novel One File #25/.04(500 RPM, 2.0N.cm)with brushing or picking motion to reach the working length.
Medium canal:
6. Use the path file #15.5/.03 (350RPM,1.5N·cm) to establish a smooth path, then use RCS Novel One File #25/.06(500 RPM, 2.0N.cm)with brushing or picking motion to reach the working length.
Large canal:
7. Use the path file #19/.02 (350RPM,1.5N·cm) to establish a smooth path, then use RCS Novel One File #35/.04(500 RPM, 2.0N.cm)with brushing or picking motion to reach the working length.
8. Use the path file #19/.02 and #19/.03 with 350RPM,1.5N·cm to establish a smooth path, then use RCS Novel One File #35/.06(500 RPM, 2.0N.cm)with brushing or picking motion to reach the working length.