Product Highlights

1) Multi-Taper system
2) SX，S1，S2 are flexible;F1, F2, F3 are extremely flexible, both have memory control.
3) Ensures that shaping file has good cutting efficiency and finishing file can save more dentin.
Introduction
Color
ISO Standard tip size and color, making it easy to distinguish for dentists.
Stopper
ISO standard stopper, used to measure the working length, The blackine on the stoper can indicate the working direction of the files.
Non-cutting tip
Handle
Traditinal 13mm handle
Laser mark
18mm, 19mm, 20mm, 22mm
Working length
21mm, 25mm, 31mm
Product Details
Narrow canal
SX+S1+S2+F1 prepares the root canal to a diameter of 0.20mm, with a taper of .07 over the first apical millimeters.
Medium canal
SX+S1+S2+F1+F2 prepares the root canal to a diameter of 0.25mm, with a taper of .08 over thefirst apical millimeters.
Wide canal
SX+S1+S2+F1+F2+F3, or T4, or T5 prepare the root canal to a diameter of 0.30mm or bigger than 0.30 mm over the first apical millimeters.
Speed&Torque
350RPM/2.0N
Number Rule
Usage Protocol
Instruction Manual
1.Create a straight-line access to canal orifice.
2. Gently explore the canal by using #10 stainless steel hand files passively scouting, initial detection the working length and record it.
3. Use the path file #16/.02 with 350RPM, 1.5N.cm to scout the coronal 2/3, making sure the smooth and reproducible glide path is confirmed.
4. Design an access to the root canal openings with respect to the anatomy of the tooth, giving particular care to smoothing the internal axial walls and enlarging the root canal coronal 1/3 with SX(350RPM, 2N·cm).
5.Use RCS Gold LT Rotary file S1, S2,F1, F2, F3,F4, or F5 if needed using a brushing or picking motion (350 RPM, 2N.cm) to reach the working length according to the root canal size.
*Tip: Irrigation needs to be used before every step.